First-floor installation
- Qualifies
- The room and the condenser are both at ground level.
- Does not
- Second-story head, roof or balcony condenser. Installation is quoted from the standard range, $2,250–$2,750, or $2,750–$3,500 where access is tight.
For a Limited TimeStarting at $4,175 Installed
★★★★★ Licensed California HVAC Contractor
- ✓Installed by certified technicians
- ✓Factory-matched equipment
- ✓Transparent pricing
- ✓Bay Area service
Prefer to talk? Call (510) 227-8383
When's a Good Time to Reach You?
Leave your details and we'll call you back to confirm time.
Installed Prices at a Glance
Estimated all-in installed price by system size — equipment, labor, city permit, and HERS verification included.
Tap a size to see its typical application
1-Ton$4,175 – $4,575Limited-Time Offer†
Bedroom, office, garage, or ADU — up to ~550 sq ft
1.5-Ton$4,375 – $4,775Limited-Time Offer†
Larger rooms and open floor plans — up to ~750 sq ft
1.5-Ton · 2 Rooms$8,235 – $10,250
Two rooms on one outdoor unit — a 12,000 BTU head for the living area plus a 6,000 BTU head for a bedroom or office
2-Ton · 3 Rooms$10,950 – $11,850
Three rooms on one outdoor unit, each independently controlled
3-Ton · 4 Rooms$14,350 – $15,150
Four rooms / whole-home ductless comfort
† Limited-time offer: flat $2,500 installation on 1-Ton and 1.5-Ton systems — applies to first-floor install, line set under 15 ft, 240V disconnect available at the condenser.
* Standard installation. City permit ($250–$650) and HERS verification ($250) are passed through at cost. A new dedicated electrical circuit, long line sets, and other site-specific work are additional — open each size's estimator for the full breakdown. Your exact price is confirmed with a free written quote.
How the Cost Breaks Down
Equipment, installation, city permit, and HERS verification — see exactly what goes into the price. Your exact, all-in total is confirmed at a free in-home visit.
The Install That Gets the Flat Price
One head, one condenser, both on the ground floor and a wall apart. Here is what makes it the simplest job on the schedule — and what changes if your house says otherwise.
- Decides the flat price
- Existing circuit, already in the wall
- Standard scope on every install
What Decides the $2,500 Flat Install
Three conditions. All three true and the mechanical installation is $2,500 flat. Any one of them false and we quote the work it actually takes — before we start, in writing. Electrical work is never inside the flat price; it is always its own line.
Line set under 15 ft
- Qualifies
- The condenser goes on the wall right outside the room.
- Does not
- Condenser around the corner or across the yard — longer line set and cover, added refrigerant, more labor.
240V power already at the condenser
- Qualifies
- An existing 240V circuit and disconnect already land where the condenser goes. We connect the whip and commission the system.
- Does not
- New dedicated circuit run from your panel, $950, plus your city's electrical permit at cost. Quoted as its own line — never folded into the flat install price.
The $2,500 covers installing the equipment — not electrical work. The mechanical permit ($250–$650, depending on city) and HERS verification ($250) are separate line items on every quote, passed through at what the city and the rater charge. They are in the total you see on the pricing table — not hidden behind it.
Labor & Manufacturer Warranty
Every installation comes with a labor guarantee and the manufacturer's limited parts warranty — and a maintenance plan extends your labor coverage to five years.
🛡 Single-Zone Mini Splits
Standard single-zone systems
- ✓
1-year labor warranty — full installation labor coverage, included at no extra cost.
- ✓
5-year limited parts warranty — manufacturer coverage on mechanical and electrical components.
Extend labor coverage to 5 years with a maintenance plan — $180/year.
🛡 Multi-Zone, Premium & Central AC
Multi-zone systems, premium single-zone equipment, and central AC systems
- ✓
1-year labor warranty — full installation labor coverage, included at no extra cost.
- ✓
10-year limited parts warranty — manufacturer coverage on mechanical and electrical components.
Extend labor coverage to 5 years with a maintenance plan — $250/year.
Permitted, HERS-verified installation keeps your manufacturer warranty valid.
Documented annual maintenance is required to keep both the extended labor coverage and the manufacturer's parts warranty valid. Coverage does not include failures due to power surges, lack of maintenance, or “Acts of God” (e.g., fire, flood, or extreme weather).
Multi-Zone Mini Split Install
One outdoor condenser, multiple indoor heads — efficient, room-by-room comfort from a single system.
Like what you see? Get your exact, written price — free.
Get My Free QuoteWhat's Included in Every Install
From sizing to permits to cleanup, we handle the whole job. You get a written quote up front and a fixed price — no upsells on the day of install.
✓ Included
Outdoor Unit
High-efficiency inverter-driven condenser that mounts outside your home. Handles heat exchange year-round for both cooling and heating.
✓ Included
Indoor Unit
Wall-mounted air handler that delivers conditioned air directly into your space. Operates near-silently for comfortable, quiet performance.
✓ Included
15 ft Line Set
Pre-flared copper refrigerant lines connecting the indoor and outdoor units. Priced for a standard 15 ft run — longer runs available at additional cost.
✓ Included
Line Set Cover
Decorative PVC channel that conceals and protects the refrigerant lines along the exterior wall of your home. Covers 15 ft included.
✓ Included
Outdoor Stand
Heavy-duty mounting bracket that keeps the outdoor condenser level and elevated, improving airflow and protecting it from ground moisture and debris.
✓ Included
6 ft Whip
Flexible electrical conduit that provides the final connection between the disconnect box and the outdoor condenser unit.
- Mini split units in stock — no supply-chain waiting
- Single-zone or multi-zone configurations
- Direct-from-manufacturer pricing
- Permits & inspections handled
- Brand warranties + workmanship guarantee
- Old equipment removal & cleanup
ReviewsWhat Our Customers Say
5.0
How long does installation take?+
Most single-zone mini split installs are completed in a single day. Multi-zone systems typically take 1–3 days. We confirm the timeline in your written quote.
Do I need to add ductwork?+
No — that's the main benefit of a mini split. We mount the indoor unit on the wall and run a small (3-inch) refrigerant line to the outdoor condenser. No ducts, no demo.
Can I cool just one room?+
Yes. Single-zone mini splits are perfect for additions, ADUs, garage conversions, sunrooms, or any room that's hard to cool with central air. Multi-zone systems handle whole homes.
Do you offer financing?+
Yes — approved homeowners can finance their installation with flexible monthly payment options. Ask us for details during your in-home quote.
What brands do you carry?+
We stock major brands including Mitsubishi, Daikin, Fujitsu, LG, and more. Our in-stock inventory means fast install — no waiting weeks for equipment.
Do you pull permits?+
Yes — every install includes permits and inspections so your system is up to code and your warranty stays valid.
What areas do you serve?+
Livermore, Pleasanton, Dublin, Fremont, San Leandro, Hayward, Oakland, Milpitas, San Jose, and Tracy.